Step-by-Step Instructions for Cleaning the Corona Wire on a DR Cartridge
The corona wire is responsible for applying an electrical charge and should be cleaned whenever you notice vertical black streaks on your prints.
– begin by sliding the colored plastic tab back and forth across the top of the DR cartridge precisely five times.
– After completing this action, ensure that you snap the tab firmly back into its original arrow position to prevent any large vertical black lines from appearing in your prints.
Great guide! I always struggled with cleaning the corona wire, but your step-by-step approach makes it so much easier to follow. Thanks for sharing!
This is super helpful! I never knew the proper way to clean the corona wire before, but your detailed instructions really clear things up. Definitely going to give it a try!
I’m glad to see so many people finding this guide useful! Cleaning the corona wire can really make a difference in print quality, and these instructions are straightforward and easy to understand. Thanks for putting this together!
This guide is a lifesaver! I used to dread cleaning the corona wire, but your clear steps and tips make it feel manageable. I can’t wait to see the improvement in my prints after following this!
This guide is fantastic! I’ve always found cleaning the corona wire a bit intimidating, but your detailed instructions take the fear out of it. Looking forward to better print quality – thank you for sharing!